H/JIG/A - Hinge jig two part in case

Our Price:  £260.66
List Price:  £302.40
Saving Of:  14%
(Inc. 20% VAT)



In stock, immediate despatch


Model:  H_JIG_A
Bar Code:  5027654536339
Part Number:  H/JIG/A
Brand:  Trend

The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames using a plunge router.
  • It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
  • Used on-site & in joinery shops to increase productivity with excellent results.
  • Four apertures for fire door requirements.
  • No need for marking out in the conventional way.
  • Quick & simple to set-up as the hinge is used as the pattern.
  • Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
  • Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops.
  • Use with a light duty plunge router with 1/4 inch collet.
  • Long reach router cutter required, 12mm diameter with 70mm overall length.
  • Angled position slots to prevent creep.
  • Unibase may be needed.
  • T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160
Hinge sizes possible
Length min.:2 5/8" (67 mm)
Length max.:5" (127 mm)
Width min.:3/8" (9.5 mm)
Width max.:1 3/8" (35 mm)
Width max. in 35mm rebate:20 mm
Width max. in 44mm rebate:30 mm
Door sizes possible
Height min.:6' 5" (1955 mm)
Height max.:2100 mm*
Thickness min.:5/8" (16 mm)
Weight:3.3 kg
Jig overall length:1957 mm
Fixed stop max. thickness:25 mm
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up
4 x Apertures
2 x Bradawls with spacer
1 x 16mm guide bush
1 x T-Handle hex key
1 x 4mm spacing gauge
1 x Carry case

Be the first to Write a Review for this item!

CALL 01462 481808 / Trend Products Online from AC Supply

Trend Products Online
Trend Products Online from AC Supply